GL1800Riders - View Single Post - Real wheel nut size/removal
View Single Post
post #4 of (permalink) Old 03-29-2017, 04:34 PM
doug of no fl
Seasoned Member
 
doug of no fl's Avatar
 
Join Date: Jun 2013
Location: Summerfield, FL.
Posts: 641
I would also try a little heat & a little tapping.

If that don't do it, as long as it is still on it's side, you could fill the "stud chamber" up with a penetrant.
As said on other posts ATF & Acetone makes a good penetrant..

Make sure you are using enough leverage (Long breaker bar) to get the proper torque.

Hopefully the stud stays in and you don't have to cut the lug nut off. Good luck..
doug of no fl is online now  
 
 
For the best viewing experience please update your browser to Google Chrome