GL1800Riders - View Single Post - Front Forks Project
View Single Post
post #7 of (permalink) Old 04-19-2017, 07:12 PM
Seasoned Member
Dodgehemi61's Avatar
Join Date: Oct 2015
Location: Southwest michigan
Posts: 448
Sounds like a plan. But I would check into replacing the lower triple tree with a billet one, and not install the fork brace. And you will get a lot of different answers on what to torque the neck bearing at with all balls. I had mine apart 4 times to finally get it so the bike did not wander when going slow. I ended up at 12ft/lbs. This gave me 3 lbs of pull when using a scale.
I tried, 30, 21, 16 and enden up at 12 pounds of torque. I went with progressive mono tubes with the billet tree and all balls.
Dodgehemi61 is offline  
For the best viewing experience please update your browser to Google Chrome