GL1800Riders Forums banner

Ring of Fire replacement led tube

4K views 4 replies 3 participants last post by  wing rider02 
#1 ·
A while back I seen a replacement for the ring of fire wheel light for the wing. It was a tube that slipped into the rotor cover where the existing strip of lights are. The one that I wanted information on was a flexible red tube that shows red in towards the wheel and red out away from the wheel. I don't see any on Ebay now. Do any of you know about this product?
 
#4 ·
Yes. Thanks so much. I have a couple of leds out of my ring of fire .
A little clear nail polish on the new Leds will seal them from any water getting in there and shorting them out. That conclusion comes simple from what I remember reading:lol: Maybe one of the led experts on here will chime in about that:thumbup:
 
#5 ·
Those light tubes will not fit into the 1800 rotor covers like the orginal light strips do. You will have to mount them on the outside of the rotor covers. Those tubes were made for the GL-1100 & 1200 rotor covers and are a lot bigger than the 1800 light strips.
Take your rotor covers apart and look at the size of your light strips before you order those light tubes and you will see the difference.
You would come closer to getting the correct size LED Strip at Auto Zone or Advance Auto. Hope this helps.
Buzzsaw
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top